DAELIM VJF125 Service Manual - Rear Brake Caliper
16-20
HYDRAULIC BRAKE
Remove the rear caliper bracket bolts, caliper and the
brake pads. (16-7)
INSTALLATION
Install the front caliper to front fork.
Tighten the caliper mounting bolts to the specified
torque.
TORQUE : 3.0kgf
·
m
Install the brake hose to the caliper body with two new
2 oil bolts washers and oil bolts.
Tighten the oil bolt to the specified torque.
TORQUE : 3.4kgf
·
m (34 N
·
m)
Fill the brake fluid to upper level, bleed the brake
system. (16-5)
DISASSEMBLY
Remove the spring, slide pin, caliper bracket and boot
from the caliper body.
If there is any wear or damage in the boot, replace it
with a new one.
REAR BRAKE CALIPER
REMOVAL
Drain the brake fluid. (16-3)
Remove the oil bolt and oil washer.
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS
OIL BOLTS