EZ Call a Matic User Manual - page 14
Parameter Programming
101 - Passwords
(to change/delete/set new passwords)
102 Configure serial ports
(to configure the system's serial ports)
103 - Configures SMDR
(to configure the SMDR of the PBX)
104 - Set time, date
(to set the real time clock)
105 - Print on fly
(to set print-on-fly options)
106 - Raw data pass through
(to check the printer/serial port)
107 - Set grace time
(to set grace time for call charging)
108 - Non call record options
(to set options for non-call records)
109 - Auto report scheduling
(to set auto night report timings)
110 - Do not fly print for extensions
(to exclude some extensions from p-fly)
111 - Do not count call on extension
(to exclude certain extensions)
112 - Do not count calls on bands
(to exclude certain bands)
113 - Evening Rates
(set discounted evening rate timings)
114 - Weekend Rates
(set discounted weekend rate timings)
115 - Local Calling
(set Local / local LD dialing options)
116 Toll Control
(dial out required through test line)
117 - Default Credit Limit
(set default credit limit)
118 Keypad options
(keypad time out, typing rate)
119 - Administrative extensions
(No toll control/surcharge extensions)
120 - Do not print on fly bands
(exclude some bands for printing on fly)
121 Extension pairing
(pair two extensions in a room)
122 - Beeper control
(Beeper on/off )
123 - Page control options
(reports on top-of-page etc.)
125 - PMS formats
(select PMS type)
126 - New AREA CODE additions
(Add new area codes)
127 Property name
(enter name of property)
128 Caller Id strings
(digits to strip for caller-id disable)
129 Valid extension list
(for Call-a-Matic Limited only)
130 PMS test program
(to send dummy PMS records to PMS)
Program No.
Program description
CallAMatic
To enter into the programming mode, press Þ key first and then as prompted by the message on
the display press ENTER To abort, press EXIT
When you press ENTER the message "Enter Password:" is displayed. Enter your password here to
gain access to the programming mode. If an invalid password is entered, the system prompts the
message ' illegal password ' and returns to normal mode of operation.
Users of 4 digit passwords are not allowed access to parameter programming. Once a valid
password is entered, the message "Enter Program No.:" is displayed.
Once a valid program number has been entered, the message prompts for that program are
displayed. A '
+
' sign in the top right hand corner means help is available for this program. Press
the BLUE key to view the Help messages. If an invalid program number is entered, the error
message “No such program number” is displayed on the screen. Press any key to erase the message.
The programs available are: