EZ Call a Matic User Manual - page 23
The number of bytes taken up by each type of entry is given in the above table. All the entries
made under all of the above programs are stored together and the total memory area allocated
for all these entries is 8192 bytes. Hence, the total number of bytes occupied by these entries will
be the sum of all the entries in all the above programs.
For example, 100 local exchanges (100x3=300 bytes), 50 admin. extensions (50x4=200 bytes), 200
10 digit local exchanges (200x4=800) and 300 extension pairs (300x6=1800) will give a total of
3100 bytes (300+200+800+1800) for all the 650 entries.
On an average, the total memory space should be enough for at least 2000 entries of all types put
together.
111 - DO NOT COUNT CALLS from these extensions
A list of extensions may be entered under this program and for all calls made from these
extensions, the calls will not be counted. All calls made from extensions listed under this program
will be totally ignored. They will not appear on the screen or print on the fly and the charges will
not be calculated.
The entry is done in the same way as program #110.
112 - DO NOT COUNT CALLS to these bands
A list of band numbers may be entered under this program and all calls made to these bands will
not be counted. For e.g. if you want calls made to the '1411' directory assistance or calls to certain
numbers to be ignored - then these phone numbers may be programmed under the ' USER
DEFINED BAND' for particular numbers and that band number may be entered under this
program.
If you want to ignore all local calls, enter `201' under this program.
The entry is done in the same way as program #110. However, under this program, since all band
numbers are of 3 digits only, the Add-Delete-Search options will proceed to the next step as soon
as 3 digits are entered.
113 - Evening Rates
It is possible to apply a discount to all calls made during the evening hours. When you enter this
program, the display prompts
“Start time”
and the time is to be entered in the 24-hour format.
Once this is completed, press ENTER to go to the next prompt, where the
“End time”
is to be
entered. The
“Mark Down by %”
appears next. Enter the percentage by which you would like to
mark down all calls.
All calls made between these timings on weekdays (Monday-Thursday) will be discounted. Local
calls are not subject to these discounts.
The calls are first charged as per the “first minute” and “additional minute” charges, then marked up
and then discounted by the percentage entered under this program. The “surcharge” is added after
the discount has been calculated. For Admin calls, there is no markup hence the charges are
directly discounted.
For example, a Long Distance call of 5 minutes to CT, with first minute = 00.35 and additional
minute = 00.33, surcharge = 01.55, markup = 25%, mark down = 30% would be charged as follows:
For normal extension
= (0.35 + 4 x 0.33) [ (100 + 25) / 100 ] [ (100 30) / 100] + 1.55
= $ 3.01
For Admin extension
= (0.35 + 4 x 0.33) [ (100 30) / 100 ]
= $ 1.16
A mark down of 0% would mean that there is no discount.
CallAMatic