Lantronix MPS1-2 Installation Manual - 4 - Tcp/ip Configuration
Manual is about: Lantronix - Print Server
of
100
TCP/IP Configuration
4 - 1
4 - TCP/IP Configuration
The EZWebCon conÞguration software is the easiest way to conÞgure the MPS. The
following sections cover IP address conÞguration and print conÞguration methods for
TCP/IP hosts.
NOTE:
The Server needs an IP address before you can use EZWebCon. See
page 4-2 for instructions.
The MPS provides two major methods of printing via TCP/IP: Berkeley remote LPR and
RTEL host software.
Neither Windows for Workgroups nor Windows 95 support LPR directly; however, there
are third party solutions available. For more information about recommended peer-to-
peer printing solutions, see the Lantronix
Windows 95 FAQ
on the CD-ROM or the
Lantronix web site.