Lantronix MPS1-2 Installation Manual - page 19

TCP/IP Configuration

4 - 5

administrator to Telnet into the MPS. Once logged in, the administrator can enter the 

Change IPaddress

 command to make the address permanent.

Any host wishing to access the MPS will have to be told the MPSÕs IP address. This is 

typically conÞgured in the unix Þle

 /etc/hosts

 or via a nameserver. Refer to the hostÕs 

documentation for additional information.

% telnet 192.0.1.228

Trying 192.0.1.228

Lantronix Version n.n/n (yymmdd)

Type Help at the ‘Local_>’ prompt for assistance.

Enter Username> gopher

Local> SET PRIVILEGED

Password> system (not echoed)

Local>> DEFINE IPADDRESS 192.0.1.228