Lantronix MPS1-2 Installation Manual - Declaration of Conformity
Declaration of Conformity
(accordingly to ISO/IEC Guide 22 and EN 45014)
Manufacturer’s Name:
Lantronix
Manufacturer’s Address:
15353 Barranca Parkway, Irvine, CA 92618 USA
declares that the product:
Product Name:
Micro Ethernet Print Server
Model Number(s):
MPS1-T, MPS1-2, MPS100
conforms to the following Standards:
Safety (All):
EN 60950:1988 + A1, A2
EMC (All):
EN 55022:1988 class A
EN 50082-1:1992
Additional EMC (MPS1-2):
IEC 801-2:1991/prEN55024-2:1992-4kV CD, 8kV AD
IEC 801-3:1992/prEN55024-3:1991-3V/m
IEC 801-4:1988/prEN55024-4:1992-0.5kV Signal Lines,
1kV Power Lines
IEC 801-5:1993/prEN55024-5:1992-1kV Common Mode,
0.5kV Differential Mode, 1kV Network Cable
Supplementary Information:
“The product complies with the requirements of the Low Voltage Directive 73/23/EEC and the
EMC Directive 89/336/EEC.”
Warning: This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Manufacturer’s Contact:
Director of Quality Assurance
Lantronix
15353 Barranca Parkway, Irvine, CA 92618 USA
General Tel: 949/453-3990; Fax: 949/453-3995