Lantronix MPS1-2 Installation Manual - page 91
Frequently-used Commands
F - 9
DEFINE PORT 1 FLOW
option
CTS
SpeciÞes CTS/RTS (hardware) ßow control.
{EN|DIS}
Activates or deactivates the currently-conÞgured
ßow-control method.
NONE
Removes the current ßow control settings.
XON
SpeciÞes XON/XOFF (software) ßow control.
DEFINE PORT 1 NAME
“
newname
”
Enter a name of up to 16 alphanumeric characters for
the speciÞed port.
DEFINE PORT 1
PARITY option
parity
Enter even, odd, mark, or space. Specifying mark or
space
will change the character size to 7 bits.
NONE
SpeciÞes that no parity will be used (the default).
DEFINE PORT 1 SPEED baudnum
Sets the portÕs baud rate. Acceptable
baudnum
values range from 300 to 115200 baud (or 230000
baud for 1ooBASE-T Servers).
{SHOW|MONITOR} PORT 1
Displays the portÕs conÞguration characteristics once
(Show) or continually every three seconds (Monitor).
Counters and Status keywords can be added.
TEST PORT 1 option
COUNT rows
WIDTH cols
Sends an ASCII data stream to the port for the
speciÞed number of rows and/or columns.
POSTSCRIPT
Sends a PostScript test page to the port.
Table F-2:
Port Commands, cont.
Command
Option(s)
Description