Lantronix MPS1-2 Installation Manual - page 76

Updating Software

D - 6

D.4.2 NetWare

The MPS.SYS Þle should be placed in the login directory on the NetWare Þle server. The 

Server cannot actually log into the Þle server (since it knows no username/password); it 

can only access Þles in the login directory itself. On the Server, specify the Þle server 

name, Þlename, and path.

D.4.3 TCP/IP

Before the Server downloads the new software, it will send DHCP, BOOTP, and/or 

RARP queries (BOOTP and RARP queries are enabled by default). Next, the Server will 

attempt to download the MPS.SYS Þle using TFTP (Trivial File Transfer Protocol).

If a host provides DHCP, BOOTP, or RARP support, it can be used to set the Server's IP 

address (all) and loadhost information (BOOTP and RARP only). Add the Server's name, 

Local> SET PRIVILEGED

Password> SYSTEM (not echoed)

Local>> DEFINE SERVER NETWARE LOADHOST fileserver

Local>> DEFINE SERVER SOFTWARE SYS:\LOGIN\ MPS.SYS

Local>> INITIALIZE RELOAD