Lantronix MPS1-2 Installation Manual - 4.1 Setting The Ip Address

TCP/IP Configuration

4 - 2

4.1 Setting the IP Address

The MPS IP address must be conÞgured before any TCP/IP functionality is available.

To set the IP address, use one of the following methods: EZWebCon; a directed Ping 

packet; a DHCP, BOOTP, or RARP reply; or commands entered at the command line 

(Local>) interface. 

4.1.1 Using EZWebCon

The MPS must have an IP address before you can log into it using EZWebCon. To assign 

the IP address from EZWebCon:

1.

Start EZWebCon. Instructions for installing, running, and using EZWebCon can be 

found on the distribution CD-ROM.

2.

Click on the Lantronix logo menu in the bottom left corner of the EZWebCon win-

dow, then select 

Assign IP Address to Server

.

3.

Fill in the following information:

A. The last three bytes of the MPSÕs hardware address. The hardware address 

is printed on the bottom of the Server.

B.

The desired IP address.