Lantronix MPS1-2 Installation Manual - page 45

NetWare Configuration

5 - 7

The print server has successfully 

attached to the queue

Type NETSTAT at the Local> prompt. This will display 

information about Þleservers, printers, and queues that 

the print server has found. If a queue is in JobPoll, the 

print server has successfully attached to the queue.

The DSTree, DSContext, and 

DSLicense

Type Show Protocol NetWare NDS. This command 

shows the tree and the context that you have conÞgured, 

a failure code, and an NDS error code for each server. 

DSTree is the directory service tree on which the print 

server is located. DSContext is the context where the 

print server is located; it must match the context on the 

Þle server (The DSContext must be of the following form: 

ou=fruit.o=exotic). DSLicensed should be yes.

Printer and queue changes have 

propagated through the NDS tree

It may take a few minutes for the changes to propagate. 

If the print server doesnÕt attach, reboot the server.

Table 5-2:  

NetWare Host Troubleshooting (NDS), cont.

Area to Check

Explanation