Lantronix MPS1-2 Installation Manual - page 47

NetWare Configuration

5 - 9

Table 5-4:  

NDS Printing Errors

Bit

Failure Code Meaning

Remedy

1

Server out of memory

Turn the Server off, wait a few seconds, and turn it back on. 

Disable unused protocols and/or remove Þleservers without 

print queues from the NetWare access list.

2, 3

Unexpected response 

from Þle server

Report the problem to Lantronix Technical Support.

4

No printers found for the 

Server

Ensure that there are printers for the print server, and the 

printer names match the service names on the print server.

5

No printer queue found

Ensure that the printers have associated queues.

6

Login failed

Ensure there is a print server object conÞgured with the same 

name as the Server.

7

Authentication failed

Ensure the Server login password is the same as the print server 

object password. If the Server is using the default password 

(access), there should be no print server object password.

8

Server cannot attach to 

queue

Check the NDS partitions, replicas, and volumes to ensure the 

Þle server where the queue lives has the correct information 

about the Server and printers.