Lantronix MPS1-2 Installation Manual - B.4 Dhcp Troubleshooting

Troubleshooting

B - 4

B.4 DHCP Troubleshooting

Table B-4:  

DHCP Troubleshooting 

Area to Check

Explanation

DHCP is enabled on the Server.

Use the DeÞne Server DHCP Enabled command. 

If you manually enter an IP address, DHCP is 

automatically disabled.

Make sure the DHCP server is 

operational.

Check to see that the DHCP server is on and is 

functioning correctly.

Did the Server get its IP address from 

the DHCP server? 

Refer to the DHCP Manager on your DHCP server for 

information about addresses currently in use. If the 

DHCP server does not list your ServerÕs IP address, 

there may be a problem.