Lathem FR700 User Manual - Quick Start Steps

Quick Start Steps 

Terminal Installation 

1 

Separate the mounting-plate 

from the FaceIN terminal by 

removing the Philips head 

screws. Retain the screws for 

later. (See page 8 for more 

details.) 

2 

Install the mounting-plate to the 

wall using the supplied wall-

mount screws. Note: For best 

visibility mount the terminal for 

the shortest employee, taller 

employees can bend down. 

3 

Plug the RJ45 network cable 

into the Ethernet port and the 

Power Adapter plug into the 

Power Adapter port which is 

located in the compartment on 

back of the terminal. 

4 

Align the FaceIN terminal with 

the pins on the mounting-plate 

and secure the two together with 

the 2 Philip head screws. Be 

careful not to pinch the AC cord. 

When finished, plug the Power 

Adapter into an AC wall outlet. 

Verify the contents of your system. (For more detailed 

information turn to page 6.)