Lathem FR700 User Manual - Right

P A Y C L O C K   &   F A C E I N   U S E R ’ S   G U I D E  

67

•

Select FaceIN from the drop down list and click OK. 

•

The FaceIN terminal properties will display on the right. 

•

From the Connection tab enter the name for the terminal 

under Device Nickname. 

•

Enter the IP Address in the field, this is the address that was 

set up on the FaceIN terminal, click Save. 

•

Click the Test Connection button to verify communications 

with the FaceIN terminal. 

•

Select the Settings tab and click the Set button to send the 

time/date to the terminal. 

Connection tab - FaceIN Terminal 

The Connection tab allows you to define the name and the IP 

address for the terminal. 

Employees tab - FaceIN Terminal 

The Employees tab is used to assign employees to a terminal and to 

un-assign employees from a terminal. Note: Employees are 

automatically assigned to the terminal. If you wish not to have new 

employees automatically assigned to the terminal select the option 

“Do not automatically assign new employees to this terminal”.  

Removing Employee Assignments 

1.

From the Ribbon Bar, click the Terminal Manager tab and select 

the desired terminal from the list. The Terminal properties 

window will display. 

2.

Click on the Employees tab, from the list on the 

right

 select the 

desired employees and click the Remove button. The employees 

will be removed from the list. Click Save