Lathem FR700 User Manual - Appendix E - Payclock Client
P A Y C L O C K & F A C E I N U S E R ’ S G U I D E
89
Appendix E - PayClock Client
Software WAN Installation
These instructions identify the steps to configure the PayClock Client
software to communicate with the PayClock database server across
the internet.
Important Notes - WAN Installation Requirements
•
There must be a VPN tunnel connecting the local and remote
sites.
•
The network administrator may be required to configure the
network routers to route the ports used by the PayClock
Client and PayClock database server.
•
A static IP address is
required
on the computer designated as
the PayClock database server.
•
PayClock
must
be licensed as a “Multi-User” system,
additional license fees may apply.
Important Port Information
- The following ports are used for this
type of installation.
•
7350 - PC600 Service
•
7351 - PC600 Auto Poll Service
•
2638 - PayClock Database Server
Step #1 - Computer where the PayClock database server will
reside
•
Install the PayClock Server (Standard Install).
•
Print out the “Server Summary” information. Note: If the
“Server Summary” information was not printed during the
installation follow these steps to access the information:
•
Open the PayClock software.
•
Click the PayClock orb on the upper left.