Lathem FR700 User Manual - Esc
P A Y C L O C K & F A C E I N U S E R ’ S G U I D E
81
•
Move the face back until there is 9 to 25 inches between their
face and the terminal.
•
Turn the head fully to the right.
•
Turn the head fully to the left.
•
Raise the head up slightly.
•
Lower the head down slightly.
•
Move the face back from the terminal until there is 9 to 25
inches between the face and the terminal (if adjust positioning
message is still displaying).
•
Resume small head circles to the right (if adjust positioning
message is still displaying).
•
The progress bar at the bottom of screen will display the
process of the imaging.
•
When the face is enrolled the terminal will display, “Permit
Open Door?” press
ESC
.
•
When “Permit Attendance?” displays, press
OK
. Note: You
must press OK; otherwise punches will not be recorded for
polling.
•
The screen will display “Finished” and will return to the
“Input User No” screen. Continue with the next employee or
press
ESC
,
ESC
and
ESC
again to return to the normal
time/date screen.
Card Verification Method
•
When “Please Swipe Card” displays, present the card at the
terminal.
•
When the card is enrolled the terminal will display, “Permit
Open Door?” press
ESC
.
•
When “Permit Attendance?” displays, press
OK
. Note: You
must press OK; otherwise punches will not be recorded for
polling.
•
The screen will display “Finished” and will return to the
“Input User No” screen. Continue with the next employee or