Lathem FR700 User Manual - Terminal Startup
Terminal Startup
5
6
-Set up the network communications-
·Press the
MENU
key, the Functions
Menu will open.
·Press
4
, the System Setting menu will
open.
·From the System Setting menu, press
2
-
Set Network.
·Enter the IP Address for the terminal and
press
OK
.
·Enter the Mask Code and press
OK
.
·Enter the Gateway Address and press
OK
.
·The terminal will automatically restart.
(For more detailed information turn to
page 10.)
Note: You may have to contact your
network administrator if you are unsure
how to set up the network
communications.
-Set up the first Administrator-
·Press the
MENU
key, the Functions
Menu will open.
·Press
1
, the Set Admin menu will open.
·From the Set Admin menu, press
1
-
Admin 1.
·Position your face and follow the
prompts.
(For more detailed information turn to
page 11.)