Lathem FR700 User Manual - Facein Wan Installation

P A Y C L O C K   &   F A C E I N   U S E R ’ S   G U I D E  

88

FaceIN WAN Installation

•

At the remote site install mount and connect the FaceIN 

terminal to the network. 

•

With the FaceIN powered up and connected to the network, 

press the 

MENU

 key, the Functions Menu will open. 

•

Press 

4

, the System Setting menu will open. 

•

From the System Setting menu, press 

2 - Set Network

. 

Note:

 You may have to enter leading zeros when entering the 

addresses. For example, the address 

10.0.0.1

 would be entered as 

010.000.000.001

 at the terminal. 

•

Enter the IP Address for the terminal and press 

OK

. 

Note:

This is the IP address from where the FaceIN terminal will 

reside at the remote site. 

•

Enter the Mask Code and press 

OK

.

 Note:

 This is the subnet 

Mask address from where the PayClock database computer 

resides. Refer to the 

Connection Info

 print out. 

•

Enter the Gateway Address and press 

OK

.

 Note:

 This is the 

Gateway address from where the PayClock database 

computer resides. Refer to the 

Connection Info

 print out. 

•

The FaceIN terminal will restart automatically. 

•

To verify the connection open PayClock, select the Terminal 

Manager tab and click the Test Connection button. 

•

The FaceIN terminal will be operational. 

•

Update the FaceIN terminal and enroll the employee faces.