Samlexpower Evolution EVO-2212 Owner's Manual - page 122
30 | SAMLEX AMERICA INC.
APPENDIX A
SECTION 5 |
SD Card
5.1 SD CARD GENERAL INFORMATION
SD Card slot has been provided for data logging and for saving the programmed parameters.
SD card supports FAT16/FAT32 format up to 16GB in size.
When the SD card is inserted, the LCD screen will display the following.
SD card detected
V2.x xxGB
SD card
unusable !
SD card
Read error !
SD card
Write error !
SD card full !
F i l e c r e a t i ng . . .
SD card is detected and shows the Version and capacity. "xx" is the capacity.
SD card detected
V2.x xxGB
SD card
unusable !
SD card
Read error !
SD card
Write error !
SD card full !
F i l e c r e a t i ng . . .
Not supported card.
!
CAUTION!
Do not remove SD Card when data loggin has been enabled (may corrupt files). Follow "STOP
SD CARD" procedure (Section 4.10) before removing the SD Card.
5.2 DATA LOGGING
It is highly recommended that the current date and time be set as the data log files will be re-
corded with this EVO’s programmed date and time. Please see Section 4.9 for "TIME SETTING".
Data logging can be disabled and data logging times can be selected using Parameter Set-
ting Mode under "Other Functions" (See Section 4.8 and Table 4.8 under heading "DATALOG
TIME" and "DATALOG DISABLE").
When the SD card is inserted and Data Logging Function is enabled (Default), the EVO In-
verter Charger will start recording statistics and events on the card.
SD card detected
V2.x xxGB
SD card
unusable !
SD card
Read error !
SD card
Write error !
SD card full !
F i l e c r e a t i ng . . .
Data log function has been initiated and new file is being created. Do not
remove the SD card when file creating is displayed.
SD card detected
V2.x xxGB
SD card
unusable !
SD card
Read error !
SD card
Write error !
SD card full !
F i l e c r e a t i ng . . .
Read error, the data log function/update/upload will stop.
SD card detected
V2.x xxGB
SD card
unusable !
SD card
Read error !
SD card
Write error !
SD card full !
F i l e c r e a t i ng . . .
Write error. The Data logging function will stop.
SD card detected
V2.x xxGB
SD card
unusable !
SD card
Read error !
SD card
Write error !
SD card full !
F i l e c r e a t i ng . . .
1. Card full. Data logging funtion has stopped.
2. There is not enough space to create Data Log File Folder or to save file
with saved programmed parameters.
NOTE: Once there is enough space to create a Data Log File Folder and
subsequently, it runs out of capacity due to recording newer data, it will
start to overwrite on older files.