Samlexpower Evolution EVO-2212 Owner's Manual - page 27
Other manuals for Evolution EVO-2212:
Owner's Manual
Manual is about: Inverter/Charger Pure Sine Wave
of
136
26 | SAMLEX AMERICA INC.
SAMLEX AMERICA INC. | 27
SECTION 2 |
Components & Layout
2.5 BATTERY TEMPERATURE SENSOR EVO-BCTS [FIG 2.5 (a)]
Fig 2.5(a) Temperature Sensor Model EVO-BCTS
Fig 2.5(b) Temperature Sensor Installation
1. Temperature Sensor: Mounting hole: 10mm/0.39” suitable for 3/8” or 5/16” battery studs
2. RJ-45 Plug
3. 5 meter/16.5 ft cable
Note: Mount the sensor on the Positive or Negative terminal stud on the battery as shown in Fig 2.5(b)
3
1
2
2.6 CONTENTS OF PACKAGE
Inverter Charger
Temperature Sensor EVO-BCTS [Fig 2.5(a)]
DC Terminal Covers (1a, 1b: Fig 2.1) (Fitted on the unit with 2 screws each)
Mating Connectors (14, 15, 16: Fig 2.1)
Wire End Terminals [Fig 3.11(a)]
Owner's Manual
Quick Start Guide