Tally T6090 Maintenace Manual - page 174
T6090 Maintenance Manual Supplement
6
Procedure 2B. Paper Guide Access (T6091)
This procedure must be performed to allow access to the print mechanism
and electronics in the T6091 printer series.
Step 1.
Turn the power off.
Step 2.
Follow Procedure 1B (on the previous page) for opening the cover an additional
amount.
Step 3.
Follow Procedure 2 in the Maintenance Manual for removing the Control
Panel.
Step 4.
Loosen the two screws that secure the back of the paper guide/
cover in place. Reach behind the paper guide and grasp the paper stacking chains
and lift them up as you pull up on the back of the paper guide cover to pivot it
toward the front of the printer.
Step 5.
If you need to completely remove the paper guide assembly (for example, to gain
access to the hammerbank area), remove the four front screws then lift the paper
guide assembly off the printer.
Remove the four
front screws to completely
remove the paper guide.
Loosen the two rear
screws to pivot the
paper guide
forward.
Figure 4. Removing the Paper Guide