Tally T6090 Maintenace Manual - page 48
T6090 Maintenance Manual
3–2
Fault Override
To allow continued printer operation during serious faults, which usually shut down
printer operation, you may use the Fault Override Category in the printer menus system.
This allows you to troubleshoot serious faults in order to repair them.
One Fault Override Parameter (Paper Motion) is available in the Standard Multilevel
Menus. Once it is enabled it remains enabled until it is disabled through the Control
Panel, a printer reset escape sequence is received by the printer, or printer power is
cycled.
Eight more are available in the Tech Access Mode, under the TEST Menu. They can only
be enabled while the printer is in Tech Access Mode. However, they will remain in
whichever setting (On or Off) you select when you leave Tech Access Mode.
All of the Fault Override Parameters are explained in Chapter 2, under TEST Menu.
This feature must be used with extreme caution. Any time you disable one of the Fault
Sensing Systems on your printer you lose protection from situations that may result in
damage to the printer.
Dump Mode
Dump Mode is used to troubleshoot problems that may arise when processing data. You
can print out only control codes, control codes and spaces, or control codes, spaces and
text in hexadecimal format for use as a debugging tool. The Dump Mode Parameter is
explained in Chapter 2: Menu Operations.