Tally T6090 Maintenace Manual - page 73
Other manuals for T6090:
Maintenance Manual
Manual is about: Line Impact Printer
of
202
Chapter 4: Removal and Reinstallation Procedures
4 –3
STEP 2.
Grasp the printer lid by the front edge with one hand while you use a Phillips screwdriver to
remove the hinge-stop to the immediate left of the right hinge.
Step 3. Slide
Lid to Left
and Off
Hinges
Step 2.
Remove
Hinge Stop
Figure 4–2. Removing the Lid
STEP 3.
After you remove the hinge-stop, slide the lid assembly to the left to remove it from the
printer. If the lid does not slide off easily, loosen the hinge screws , then try to slide the lid off
again.
Reinstalling
To reinstall the printer lid, reverse the removal steps.