Yamaha M7CL StageMix V1.5 Quick Start Manual - page 12
M7CL Quick Start Guide Part 2
12/20
Connecting Studio Manager / M7CL Editor:
Editor setup; simple PC M7CL via network port 2.
To set the computer Internet Protocol (TCP/IP) properties;
[Windows] > [Control Panel] > [Network Connections] > [Local Area Connections] > [Properties]. Then select
‘Internet Protocol (TCP/IP)’ from the scroll list and click [Properties].
Set the M7CL network settings to the suggested default setting shown here in the NETWORK pop-up.
When the driver and IP settings are set, click [OK] to action the new settings.
IP address;
match the first 3 sets of 3
numbers, but make the last number
different.
e.g. 192.168.000.003 (or 192.168.0.3)
Subnet mask;
use ‘255.255.255.000’.
Default gateway;
this would only be
used for connections between
different networks, leave it as the
default setting for simple connection.
Set the
Protect No.
to match the
MAC ADDRESS in the NETWORK
pop-up of the console.
Match the IP Address to the M7CL’s
IP ADDRESS (192.168.0.128 in this
example). These should be different
from your computer’s IP address.
Next, set up the DME-N Network Driver (called DME because it was developed for the YAMAHA DME
digital mixing engine series);
[Windows] > [Control Panel] > double click the icon to open the dialog box.