Yamaha M7CL StageMix V1.5 Quick Start Manual - page 15
M7CL Quick Start Guide Part 2
15/20
The back panel. Connections and outport delays.
Each output, including the slots and AES, has a delay, polarity and attenuator adjustment available from the
OUTPUT PORT pop-up. This is found via the [SETUP] and [OUTPORT SETUP] buttons.
Each input channel has a balanced XLR input
to the high quality mic preamp. This includes
the STEREO input channels
2TR OUT DIGITAL;
in addition to the 16 analog OMNI
OUT, there is one AES/EBU digital output (two
channels in one connector).
REMOTE
; this carries remote control information to
Yamaha’s AD8HR remote head amps.
WORD CLOCK;
use these connections for other digital
audio devices that are not word-clocked through the
audio connection.
MIDI;
the console can generate or receive MIDI
program changes and MIDI control data changes via
these ports.
NETWORK;
this Ethernet connector is for connecting
to a computer running Studio Manager/M7CL Editor.
OMNI OUT;
there are 16 assignable analog outputs. These can be assigned to any MIX bus, matrix,
master, monitor, or direct output. They cannot be insert sends.
Note; this is the best screen to view output
patching.
Note; push the knob and turn at the same time
to get ‘fine resolution’.