Yamaha M7CL StageMix V1.5 Quick Start Manual - page 7
M7CL Quick Start Guide Part 2
7/20
The virtual rack; effects and graphic EQ:
Graphic EQ. Selecting and editing the GEQs.
From the main rack screen, press the virtual rack mounted GEQ. This brings up the GEQ pop-up.
From the GEQ pop-up, press the tab
below the GEQ image with the
frequency range you want to edit. For
example, [200-1k]. The tab will turn
white and the faders of the Centralogic
TM
section will move to match the chosen
frequency range. Moving these faders
will edit the GEQ curve. Press different
tabs to access different frequency
groups.
Flat the whole EQ using the [FLAT]
button on the GEQ pop-up.
Different GEQs can be accessed from
the tabs at the bottom of this pop-up.
Flex15GEQ are selected and edited in
the same way. An AVAILABLE BANDS
count-down is displayed.
Zero individual Hz bands by pressing
the [ON] key above the fader.