Yamaha M7CL StageMix V1.5 Quick Start Manual - page 4
M7CL Quick Start Guide Part 2
4/20
The virtual rack; effects and graphic EQ:
Effects. Mounting units in the virtual rack.
M7CL has an on-board virtual rack consisting of eight units. Any of the eight can be filled with 31 band graphic
EQ and the last four can be filled with SPX type multi-effect units. Any one unit can be a single 31 band GEQ or
2 x “flex 15” GEQ.
The default Scene 000 has four effects and four GEQ selected. There are always eight virtual rack units, even if
some are blank.
Only units 5-8 can be selected as effects. Any of the units can be GEQ or Flex15GEQ. To change the selected unit
from its current state to one of the other states, press the [RACK MOUNT] button. This brings up the RACK
MOUNTER pop-up window for the selected unit.
Press the [RACK] button in the Function Access Area to access the on-
board virtual effects rack. There are two tabs [GEQ/EFFECT] and
[EXTERNAL HA]. Press the tabs to change between the screens.
Use the RACK MOUNTER screen buttons to select a [BLANK], [31BandGEQ],
[Flex15GEQ], or [EFFECT]. Be sure to press [OK] to mount the effect. [X] will close the
pop-up without making the change.
This is the VIRTUAL RACK
GEQ/EFFECT screen for selecting and
controlling GEQ and effects.
This is the VIRTUAL RACK
EXTERNAL HA screen for controlling
external AD8HR head amps.
Press the [RACK MOUNT] button to
access the RACK MOUNTER pop-up.