3Com OfficeConnect User Manual - page 57
Management Settings Pages
4-19
Alternatively, you can copy the online documentation’s
files onto your local drive or a network drive, and
specify that location.
When specifying the locations of the help system and
documentation, use forward-slashes (‘/’) instead of
back-slashes (‘\’). For example,
c:\myfile
becomes
c:/myfile
.
The fields are:
Help
Specifies where the online help system can be
found. Enter the appropriate directory or web address.
Examples are:
■
file://f:/help/default.htm
■
http://yournetwork.com/help/
default.htm
The location specified for the help system must have
default.htm
. on the end.
Documentation
Specifies where the online
documentation can be found. Enter the appropriate
directory or web address. Examples are:
■
file://f:/documentation/manual.htm
■
http://yournetwork.com/docs/
manual.htm
Getting Started
The Getting Started pages are a series of pages which
set up basic information for the switch. You are
asked:
■
For a descriptive name for the switch.
■
If you want to allocate the switch IP information or
leave the allocation to a BOOTP server on your
network (if you have one). A BOOTP server
automatically allocates IP addresses to all
equipment on your network.
If you chose to allocate the IP information, you are
asked:
■
For an IP address and subnet mask for the
switch.
■
For an IP address for a default router — You
may have a default router which you want the
switch to use to communicate with other
networks.
■
The file path or web address (URL) for the online
help system and documentation files.
■
To enter a new password (you can leave it blank if
you don’t want to change it).
If you have no previous knowledge of IP, refer to