3Com OfficeConnect User Manual - page 58
4-20
C
HAPTER
4: M
ANAGING
Y
OUR
S
WITCH
U
SING THE
W
EB
I
NTERFACE
You do not have to use the Getting Started pages to
configure this information, as it can all be configured
using other pages in the web interface.
If you have already configured some of this
information for the switch, it appears in the
appropriate fields on the pages.
When you have entered the information in a page,
click
Apply
to accept the changes and display the next
page. You can use the back button of your web
browser to return to a previous page. When you
display the last page, click
Finish
to exit from the
Getting Started pages.
If you change any of these IP address fields, you
must reset the switch (refer to
on page 4-24)
and then re-access the switch using the new values.
Location
This page allows you to specify where the switch is
located.
Password Setting
This page changes the password for the user level
that you are using, as shown in
. The
passwords that you type do not appear on the screen.
Figure 4-13
Password Setting Page
If you change the password, a message appears
informing you that the web browser can no longer
access the switch. This is because the web browser is
still using the old password. You must re-access the
switch using the new password.