4RF Aprisa SR+ User Manual - page 117
114 | Managing the Radio
Aprisa SR User Manual
Maintenance > Upgrade
UPGRADE
USB Upgrade
This parameter sets the USB upgrade status to one of the values in the following table. The default setting
is enabled.
USB Upgrade Status
Function
Disabled
New software will not be uploaded from a USB flash drive into the
Aprisa SR.
Enabled
New software can be uploaded from a USB flash drive in to the
Aprisa SR and will be activated automatically.
Authenticate
New software can be uploaded from a USB flash drive in to the
Aprisa SR but will not be activated.
The ‘Switch to new Software’ option is used to manually
authenticate the new uploaded software.
To authenticate the new uploaded software:
1. Select Terminal Settings > Maintenance > Upgrade.
2. Tick the ‘Switch to new Software’ checkbox.
3.
The following parameters are show:
Parameter
Function
Active Software Version
This displays the version of software currently operating the radio.
Standby SW Version
If new software has been uploaded to the radio but not activated,
this field displays the version of software uploaded awaiting
activation.