4RF Aprisa SR+ User Manual - page 93
Manual is about: Smart, secure, industry-leading speed licensed point-to-multipoint SCADA communications for industrial monitoring and control
of
162
90 | Managing the Radio
Aprisa SR User Manual
Serial > Flow Control
CTS / RTS Status
The CTS / RTS Status can be set to enabled or disabled. The default setting is Disabled.
CTS / RTS Status
Function
Enabled
CTS / RTS hardware flow control between the DTE and the Aprisa
SR radio port (DCE) is enabled.
If the Aprisa SR buffer is full, the CTS goes OFF.
In the case of radio link failure the signal goes to OFF (-ve) state.
Disabled
The Aprisa SR radio port (DCE) CTS is in a permanent ON (+ve)
state.
This does not go to OFF if the radio link fails.