4RF Aprisa SR+ User Manual - page 66
Managing the Radio | 63
Aprisa SR User Manual
Login to SuperVisor
The maximum number of concurrent users that can be logged into a radio is 6.
If SuperVisor is inactive for a period defined by the Inactivity Timeout option on page 111, the radio will
automatically logout the user.
To login to SuperVisor:
1. Open your web browser and enter the IP address of the radio.
Note: If you haven't assigned an IP address to the radio, use the factory default IP address of
169.254.50.10 with a subnet mask of 255.255.0.0.
If you don't know the IP address of the radio, you can determine it using the Command Line Interface
(see ‘Command Line Interface’ on page 131).
Note: The Aprisa SR has a Self Signed security certificate which may cause the browser to prompt a
certificate warning. It is safe to ignore the warning and continue. The valid certificate is ‘Issued By:
4RF-APRISA’ which can be viewed in the browser.
2. Login with the Username and Password assigned to you.
Note: If unique usernames and passwords have not yet been configured, use the default username
‘admin’ and password ‘admin’.
Important: After you login for the very first time, it is recommended that you change the default
admin password for security reasons (see ‘Changing Passwords’ on page 103).