4RF Aprisa SR+ User Manual - page 98
Manual is about: Smart, secure, industry-leading speed licensed point-to-multipoint SCADA communications for industrial monitoring and control
of
162
Managing the Radio | 95
Aprisa SR User Manual
Ethernet > Controller Setup
ETHERNET CONTROLLER
IP Address
Set the static IP Address of the radio assigned by your site network administrator using the standard
format xxx.xxx.xxx.xxx. The default IP address is in the range 169.254.50.10.
Subnet Mask
Set the Subnet Mask of the radio using the standard format xxx.xxx.xxx.xxx. The default subnet mask is
255.255.0.0.
Gateway
Set the Gateway address of the radio, if required, using the standard format xxx.xxx.xxx. The default
Gateway is 0.0.0.0.
These settings are the same as setting the parameters in ‘Terminal > Device’ on page 74.