4RF Aprisa SR+ User Manual - page 92
Managing the Radio | 89
Aprisa SR User Manual
Serial > General
SERIAL PORT SETTINGS
Baud Rate (bit/s)
The baud rate can be set to 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600 or 115200 bit/s. The
default setting is 115200 bit/s.
Character Length (bits)
The character length can be set to 7 or 8 bits. The default setting is 8 bits.
Parity
The parity can be set to Even, Odd or None. The default setting is None.
Stop Bits (bits)
The stop bits can be set to 1 or 2 bits. The default setting is 1 bit.
Inter-Frame Gap (chars)
This parameter defines the gap between successive serial data frames. It is used to delimit the serial data
to define the end of a packet. The Inter-Frame Gap limits are 0.5 to 16 chars. The default setting is 3.5
chars.