4RF Aprisa SR+ User Manual - page 15
12 | Getting Started
Aprisa SR User Manual
Phase 3: Establishing the link
1.
If radio's IP address is not the default IP address (169.254.50.10 with a subnet
mask of 255.255.0.0) and you don't know the radio's IP address, see ‘Command
Line Interface’ on page 131.
Page 131
2.
Connect the Ethernet cable between the radio's Ethernet port and the PC.
3.
Confirm that the PC IP settings are correct for the Ethernet connection:
IP address
Subnet mask
Gateway IP address
Page 59
4.
Open a web browser and login to the radio.
Page 63
5.
Set or confirm the RF characteristics:
TX and RX frequencies
TX output power
Page 79
6.
Compare the actual RSSI to the expected RSSI value (from your path planning).
7.
Fine-align the antennas.
Page 138
8.
Confirm that the radio is operating correctly; the OK, DATA, CPU and RF LEDs
are light green (the AUX LED will be off).