4RF Aprisa SR+ User Manual - page 79
76 | Managing the Radio
Aprisa SR User Manual
Terminal > Operating Mode
TERMINAL MODES
Operating Mode
The Operating Mode can be set to Base Station, Repeater Station or Remote Station. The default setting is
Remote Station.
Protection Type
The Protection Type defines if a radio is a stand-alone radio or part of an Aprisa SR Protected Station. The
default setting is None.
Protection Type
Function
None
The SR radio is stand alone radio (not part of an Aprisa SR
Protected Station).
Redundant
The SR radio is part of an Aprisa SR Protected Station
Serial Data Driven Switching The SR radio is part of an Aprisa SR Data Driven Protected Station
Protection Unit
The Protection Unit defines if this radio is the primary radio or secondary radio in a Protected Station.
One radio in the Protected Station is set to Primary and the other radio to Secondary.
It is recommended that radio A (the left radio) be configured as the Primary and that radio B (the right
radio) be configured as the Secondary. The default setting is Primary.
This menu item is only applicable if this radio is part of an Aprisa SR Protected Station.