4RF Aprisa SR+ User Manual - page 83
80 | Managing the Radio
Aprisa SR User Manual
Single Frequency Operation
The TX and RX frequencies of the Base Station, Repeater Station and all the Remote Stations are on the
same frequency.
To change the TX and RX frequencies:
Change the TX and RX frequencies of the Remote Stations operating from the Repeater Station to
the new frequency. The radio links to these Remote Stations will fail.
Change the TX and RX frequencies of the Repeater Station operating from the Base Station to the
new frequency. The radio links to the Repeater Station and its Remote Stations will fail.
Change the TX and RX frequencies of the Remote Stations operating from the Base Station to the
new frequency. The radio links to these Remote Stations will fail.
Change the TX and RX frequencies of the Base Station to the new frequency. The radio links to all
stations will restore.