4RF Aprisa SR+ User Manual - page 135
Manual is about: Smart, secure, industry-leading speed licensed point-to-multipoint SCADA communications for industrial monitoring and control
of
162
132 | Managing the Radio
Aprisa SR User Manual
5. Make a note of the COM port which has been allocated to the ‘Silicon Labs CP210x USB to UART
Bridge’ (COM3 in the example below)
6. Open HyperTerminal Session (Start > All Programs > Accessories > Communications > HyperTerminal)
7. Enter a name for the connection (Aprisa SR CLI for example) and click OK.
8. Select the COM port from the Connect Using drop-down box that was allocated to the UART USB.