4RF Aprisa SR+ User Manual - 7. Installing The Radio
50 | Installing the Radio
Aprisa SR User Manual
7. Installing the Radio
CAUTION:
You must comply with the safety precautions in this manual or on the product
itself.
4RF Communications does not assume any liability for failure to comply with
these precautions.
Mounting
The Aprisa SR has four threaded holes (M4) in the enclosure base and two holes (5.2 mm) through the
enclosure for mounting.
Mounting options include:
DIN rail mounting with the Aprisa SR DIN Rail Mounting Bracket.
Rack shelf mounting.
Wall mounting.
Outdoor enclosure mounting.
WARNING:
If the Aprisa SR is operated in an environment where the ambient temperature
exceeds 50°C, the Aprisa SR must be installed within a restricted access location to
prevent human contact with the enclosure heatsink.
Required Tools
No special tools are needed to install the radio.