4RF Aprisa SR+ User Manual - page 39
Manual is about: Smart, secure, industry-leading speed licensed point-to-multipoint SCADA communications for industrial monitoring and control
of
162
36 | Product Options
Aprisa SR User Manual
Switch Over
The active radio is determined explicitly by which radio receives data on its RS-232 serial port.
The switching and blocking criteria used for the standard Protected Station do not apply. This means that
events and alarms on the unit are not used as switching criteria.
Configuration Management
The active and standby radios are separately managed by SuperVisor via the Local and Partner IP
addresses. Changes to the configuration in one radio must be reflected in the partner radio.
Changes to the Network Table are automatically synchronized from the active radio to the standby radio
but the Network Table is only visible on the active radio.