Canon imageCLASS MF5600 Series Service Manual - page 108
Chapter 3
3-52
3.2.2.9
Removing the Board
Unit
0006-3649
1) Remove the four screws [1] on the back side of the
scanner unit. Ensure that the mounting plate [2]
does not get lost.
F-3-224
2) Open up the board unit [1] and take off the
connector at six spots (five if the unit is not
equipped with the fax function) [2] and three flat
cables [3].
F-3-225
3.2.2.10
Removing the ADF
Unit
0002-7778
1) First, take the cable on the back side of he scanner
unit off the cable guide.
2) Open up the ADF unit [1] and move the stopper [2].
3) Disengage the 3 claws [4] on the ADF front cover
[3] to remove the ADF front cover.
F-3-226
4) Open up the ADF unit [1] vertically. Then lift its
rear side to remove it from the bushing.
5) As you slide the ADF unit to the rear, remove it
from the front bushing. Then lift the ADF unit up
to remove it.
F-3-227
[1]
[2]
[1]
[2]
[2]
[3]
[1]
[2]
[4]
[4]
[3]
[1]