Canon imageCLASS MF5600 Series Service Manual - page 128
Other manuals for imageCLASS MF5600 Series:
User Manual
Manual is about: LaserBase MF5600 Series
of
256
Chapter 3
3-72
3.5.1.5
Removing the Left
Cover
0002-7082
1) Remove the two screws [1] on the back side.
F-3-306
2) Remove the front screw [1] and then remove the
claw [2].
3) Slightly lift up the left side of the unit and remove
the cover as if you were opening the bottom side of
the left cover [3].
F-3-307
3.5.1.6
Removing the Front
Cover
0002-7088
1) Remove the arm claws [1] to disengage the
connection.
2) Remove the shafts on both sides [2] and remove the
front cover [3].
F-3-308
3.5.1.7
Removing the Right
Front Cover
0002-7092
1) Remove the two screws [1] and then removes the
right front cover [2].
F-3-309
3.5.1.8
Removing the Gear Unit
0002-7095
1) Remove the 2 screws [1], and detach the drive plate
(small) [2].
F-3-310
[1]
[1]
[3]
[2]
[1]
[2]
[3]
[1]
[2]
[2]
[1]