Canon imageCLASS MF5600 Series Service Manual - page 112
Chapter 3
3-56
4) Open up the ADF unit [1] vertically. Then lift its
rear side to remove it from the bushing.
5) As you slide the ADF unit to the rear, remove it
from the front bushing. Then lift the ADF unit up
to remove it.
F-3-242
3.2.3.11
Removing the LCD
Cover
0002-7783
1) Insert a precision flattop screwdriver, etc. onto the
claws [2] in the rear (both sides) of the LCD cover
[1] to disengage the claws to remove the LCD
cover.
F-3-243
3.2.3.12
Removing the
Operation Panel Unit
0002-7784
1) Remove the two screws [1].
2) Disengage the claw [3] on the rear right side of the
operation panel unit [2] and lift it up. After
removing the two flat cables, remove the operation
panel unit.
F-3-244
3.2.3.13
Removing the Scanner
Cover Unit
0002-7785
1) Remove the platen glass cover.
2) Remove the three screws [1].
3) Disengage the front claw [2] and the three claws on
the sides [3]. Lift up the scanner cover unit [4] a
little to disengage the other two claws [5]. Then
remove the scanner cover unit.
F-3-245
3.2.4
CCD Unit
3.2.4.1
Removing the Cassette
0002-7747
1) Remove the cassette by holding the cassette handle.
[1]
[1]
[2]
[1]
[2]
[3]
[3]
[5]
[4]
[3]
[1]
[1]
[2]