Canon imageCLASS MF5600 Series Service Manual - page 119
Other manuals for imageCLASS MF5600 Series:
User Manual
Manual is about: LaserBase MF5600 Series
of
256
Chapter 3
3-63
3.2.5.6
Removing the NCU
Board
0006-3660
1) Remove the two connectors [1] and the flat cable
[2].
2) Remove the two screws [3] and remove the NCU
board [4].
F-3-272
3.2.5.7
Removing the NCU
Case
0006-3659
1) Remove the three screws [1]; then, pull the upper
portion of the NCU case [2] toward you, and lifting
it upward, remove the NUC case.
F-3-273
3.2.5.8
Removing the Scanner
Unit
0006-3658
1) Remove the screw [1] and remove the connector [2]
as well as the flat cable [3] on the DCNT board.
Remove the tape holding the cable in advance.
Prepare a new tape (Part No: AZ7-0008) of a suitable
length before you attach the cable again.
F-3-274
2) Remove the two front screws [1].
F-3-275
[1]
[2]
[4]
[3]
[1]
[2]
[2]
[1]
[3]
[1]