Canon imageCLASS MF5600 Series Service Manual - page 114
Other manuals for imageCLASS MF5600 Series:
User Manual
Manual is about: LaserBase MF5600 Series
of
256
Chapter 3
3-58
3.2.4.5
Removing the Left
Cover
0002-7762
1) Remove the two screws [1] on the back side.
F-3-250
2) Remove the front screw [1] and then remove the
claw [2].
3) Slightly lift up the left side of the unit and remove
the cover as if you were opening the bottom side of
the left cover [3].
F-3-251
3.2.4.6
Removing the NCU
Board
0006-3646
1) Remove the two connectors [1] and the flat cable
[2].
2) Remove the two screws [3] and remove the NCU
board [4].
F-3-252
3.2.4.7
Removing the NCU
Case
0006-3645
1) Remove the three screws [1]; then, pull the upper
portion of the NCU case [2] toward you, and lifting
it upward, remove the NUC case.
F-3-253
[1]
[1]
[3]
[2]
[1]
[2]
[4]
[3]
[1]
[2]