Canon imageCLASS MF5600 Series Service Manual - page 116
Chapter 3
3-60
3.2.4.10
Removing the ADF
Unit
0002-7781
1) First, take the cable on the back side of he scanner
unit off the cable guide.
2) Open up the ADF unit [1] and move the stopper [2].
3) Disengage the 3 claws [4] on the ADF front cover
[3] to remove the ADF front cover.
F-3-259
4) Open up the ADF unit [1] vertically. Then lift its
rear side to remove it from the bushing.
5) As you slide the ADF unit to the rear, remove it
from the front bushing. Then lift the ADF unit up
to remove it.
F-3-260
3.2.4.11
Removing the LCD
Cover
0002-7786
1) Insert a precision flattop screwdriver, etc. onto the
claws [2] in the rear (both sides) of the LCD cover
[1] to disengage the claws to remove the LCD
cover.
F-3-261
3.2.4.12
Removing the
Operation Panel Unit
0002-7788
1) Remove the two screws [1].
2) Disengage the claw [3] on the rear right side of the
operation panel unit [2] and lift it up. After
removing the two flat cables, remove the operation
panel unit.
F-3-262
[1]
[2]
[4]
[4]
[3]
[1]
[1]
[2]
[1]
[2]
[3]