Canon imageCLASS MF5600 Series Service Manual - page 78
Chapter 3
3-22
3.1.13.4
Removing the
Modular Board
0005-9797
1) Remove the connector [1] of the NCU board.
2) Remove the two screws [2] and remove the
Modular board [3].
F-3-90
3.1.14
Power Supply Board
3.1.14.1
Removing the Cassette
0002-7493
1) Remove the cassette by holding the cassette handle.
3.1.14.2
Removing the Reader
Right Front Cover
0002-7495
1) Open the platen glass cover [1].
2) Open the front cover [2], remove one screw [3], and
remove the reader right front cover [4].
F-3-91
3.1.14.3
Removing the Right
Cover
0002-7497
1) Remove the two screws [1] on the back side.
F-3-92
2) Remove the front screw [1] and then remove the
claw [2].
3) Slightly lift up the right side of the unit and remove
the cover as if you were opening the bottom side of
the right cover [3].
F-3-93
[1]
[3]
[2]
[1]
[4]
[3]
[2]
[1]
[1]
[3]
[2]