Canon imageCLASS MF5600 Series Service Manual - page 117
Chapter 3
3-61
3.2.4.13
Removing the Scanner
Cover Unit
0002-7790
1) Remove the platen glass cover.
2) Remove the three screws [1].
3) Disengage the front claw [2] and the three claws on
the sides [3]. Lift up the scanner cover unit [4] a
little to disengage the other two claws [5]. Then
remove the scanner cover unit.
F-3-263
3.2.4.14
Removing the Flatbed
Motor Unit
0002-7793
1) Remove the two screws [1].
2) While watching the CCD unit drive belt [2]
carefully, remove the flatbed motor unit [3].
F-3-264
3.2.4.15
Removing the CCD
Unit
0006-5176
1) Remove the flat cable [1].
2) Lift the right side of the shaft [2] to release the stop.
Then slide it to release the stop on the left side also.
3) Remove the CCD unit [3] by pulling it out of the
shaft.
F-3-265
3.2.5
Flatbed Motor Unit
3.2.5.1
Removing the Cassette
0002-7748
1) Remove the cassette by holding the cassette handle.
3.2.5.2
Removing the Reader
Right Front Cover
0002-7752
1) Open the platen glass cover [1].
2) Open the front cover [2], remove one screw [3], and
remove the reader right front cover [4].
F-3-266
[3]
[5]
[4]
[3]
[1]
[1]
[2]
[3]
[1]
[2]
[1]
[2]
[3]
[1]
[4]
[3]
[2]