D-Link DXS-1100 series User Manual - page 109
D-Link 10 Gigabit Ethernet Switch User Manual
1
1
0
0
2
2
From Port / To Port: Select the appropriate port range used for the configuration here.
Click Test to test the specific port.
Click Clear All to clear all the information in this table.
Click Clear to clear all the information for the specific port.
Monitoring > Utilization > Port Utilization
This window is used to display the percentage of the total available bandwidth being used on the port.
Figure 4.145 – Monitoring > Utilization > Port Utilization
The fields that can be configured are described below:
From Port / To Port: Select the appropriate port range used for the configuration here.
Click Find to locate a specific entry based on the information entered.
Click Refresh to refresh the display table.
Monitoring > Statistics > Port
This window is used to display the packet statistics of ports.