D-Link DXS-1100 series User Manual - page 48
D-Link 10 Gigabit Ethernet Switch User Manual
4
4
1
1
Figure 4.47 – Management > SNMP > SNMP Linkchange Trap Settings
The fields that can be configured are described below:
From Port / To Port: Select the appropriate port range used for the configuration here.
Trap Sending: Enable or disable the sending of the SNMP notification traps that is generated by the system.
Trap State: Enable or disable the SNMP link change trap.
Click Apply to accept the changes made.
Management > SNMP > SNMP View Table Settings
This window is used to assign views to community strings that define which MIB objects can be accessed by
a remote SNMP manager. The SNMP Group created with this table maps SNMP users (identified in the
SNMP User Table) to the views created in the previous window.
Figure 4.48 – Management > SNMP > SNMP View Table Settings
The fields that can be configured are described below:
View Name: Enter an alphanumeric string of up to 32 characters. This is used to identify the new SNMP
view being created.